Vibration friction machine welding process can be divided into four different stages are solid friction stage, solid-liquid phase change stage, (friction welding process) steady state flow stage and cooling stage, in order to ensure uniform heating throughout the welding area, thereby ensuring uniform welding performance, attention should be paid to the entire welding process, the upper and lower parts in the weld area to fully contact, full contact can be achieved by improving the dimensional accuracy of the parts, structural Optimization and jig design. The vibration friction machine manufacturer Jfortune offers below notes for everyone considerations to use vibration friction machine.
1, after using the vibration friction machine need to close the machine tool electric control main switch, close the electric control cabinet air switch.
2, the use of vibration friction machine after cleaning the machine tool, according to the equipment lubrication chart or oiling point for oiling.
3, vibration friction machine before starting, according to the equipment lubrication chart oiling, check the oil level or oil injection point.
4, vibration friction machine operators must be familiar with the machine operation sequence and performance, strictly prohibit the use of super performance equipment.
5, vibration friction machine in the state of adjustment, adjust the slide, tool holder moving speed and distance.
6, vibration friction machine operators must be trained, tested or qualified, licensed to work.
7, the use of vibration friction machine before checking the spindle box lubrication, clutch, brake, low-speed rotation of the spindle.
8, vibration friction machine before shutdown reset, shut down the spindle motor, to stop the spindle, close the oil pump motor.
9, vibration friction machine fast forward, fast backward can not be adjusted too fast to prevent the occurrence of danger, belt tensioning to be appropriate, protective cover shall be locked.
10, the operation of vibration friction machine is strictly prohibited to wear slippers, sandals, half shorts operation to prevent iron scalding, gloves are strictly prohibited to operate.
12, vibration friction machine fixture anti-turn block must be locked to avoid screws or anti-turn block flying out, loading and unloading fixture application special plate hand, can not be tapered deformation of the spring fixture installed on the use.
13, the use of vibration friction machine before, you need to start the oil pump motor, flexible collet clamping parts, adjust the hydraulic system pressure, working pressure, clamping pressure, top forging pressure, check the spindle box lubrication.
The above content is compiled and published by Vibration Friction Machine – Jfortune manufacturer. We hope it is helpful to everyone! Jfortune has strong capabilities in non-standard machinery research, design, and production. We can customize various types of special-purpose machinery for our customers. The plastic welding equipment designed and produced by the company has been widely used in industries such as automotive, electronics, household appliances, medical devices, non-woven fabrics, and toys. Our customers are located throughout the country, and some products are exported to Europe, America, the Middle East, and Southeast Asian countries.